You are here:
For floors
hard wearing, maintenance-free, long lasting
ensures good skid resistance
avoids dirt accumulation
absorbs movement in 3 directions
for secure fixing
This expansion joint cover is on offer in anodized colours as of now. Available as standard in the four colours shown below, we will be pleased to offer you further colours upon request
| Standard version | Joint width max. [mm] | Total movement [mm] | Joint width visible [mm] | Total width [mm] | Joint height [mm] | Load bearing capacity lorris (DIN 1072) [kN] | Load bearing capacity forklift trucks acc. (DIN 1055) [kN] | Load bearing capacity special vehicles with solid plastic tyres [kg/mm] |
|---|---|---|---|---|---|---|---|---|
| FS 50/20 | 30 | 10 (±5) | 53 | 140 | 20 | 90 | 35 | 3 |
| FS 50/35 | 30 | 10 (±5) | 53 | 140 | 35 | 90 | 35 | 3 |
| FS 50/50 | 30 | 10 (±5) | 53 | 140 | 50 | 90 | 35 | 3 |
| FS 50/90 | 30 | 10 (±5) | 53 | 138 | 90 | 90 | 35 | 3 |
Production length: 4 m
Standard colour: Aluminium, available in anodized version, too
Further installation heights on request.
Applicable for anodized expansion joint covers:
By anodizing the surface is hardened, but scratches can not be ruled out under mechanical stress of the profiles.
Slight color and / or gloss deviations between different batches or deliveries do not constitute a reason for complaint.
The processing is carried out in accordance with DIN 17611 and the Qualanod (Quality Label for Sulphuric Acid-Based Anodizing of Aluminium) regulations for the anodization of aluminum.
The expansion joint covers must be cleaned and maintained in accordance with the specifications of the Qualanod and the leaflet A5 of the aluminum center.
We are happy to advise you.
Standard colors based on EURAS color fans:
C 0 Nature C 31 Light C 32 Light bronze
Other colors on request.
| Corner version | Joint width max. [mm] | Total movement [mm] | Joint width visible [mm] | Total width [mm] | Joint height [mm] | Load bearing capacity lorris (DIN 1072) [kN] | Load bearing capacity forklift trucks acc. (DIN 1055) [kN] | Load bearing capacity special vehicles with solid plastic tyres [kg/mm] |
|---|---|---|---|---|---|---|---|---|
| FS 50/20 E3 | 30 | 10 (±5) | 55 | 99 | 20 | 90 | 35 | 3 |
| FS 50/20 E4 | 30 | 10 (±5) | 55 | 99 | 20 | 90 | 35 | 3 |
| FS 50/35 E3 | 30 | 10 (±5) | 55 | 99 | 35 | 90 | 35 | 3 |
| FS 50/35 E4 | 30 | 10 (±5) | 55 | 99 | 35 | 90 | 35 | 3 |
| FS 50/50 E3 | 30 | 10 (±5) | 55 | 99 | 50 | 90 | 35 | 3 |
| FS 50/50 E4 | 30 | 10 (±5) | 55 | 99 | 50 | 90 | 35 | 3 |
| FS 50/90 E3 | 30 | 10 (±5) | 55 | 99 | 90 | 90 | 35 | 3 |
| FS 50/90 E4 | 30 | 10 (±5) | 55 | 99 | 90 | 90 | 35 | 3 |
