| Standard version | Total movement [mm] | Joint width visible [mm] | Total width [mm] | Joint width min. [mm] | Installation depth [mm] | Thickness of alu side plates [mm] | Load bearing capacity lorris (DIN 1072) [kN] |
|---|---|---|---|---|---|---|---|
| FSN 285 ** | 100 (±50) | 508 | 508 | 290 | 21 | 6,6 | 35 |
** The joint width should not differ substantially from the necessary joint width bf.
Standard colour: Aluminium
Production length: 3 m
Installation instructions:
Any unevenness in the surface to which the expansion joint is being fixed must be remedied by using an epoxy adhesive e.g. Reckli-Adhesive EP. The aluminium brackets must then be fixed at both sides with countersunk stainles.
| Corner version | Total movement [mm] | Joint width visible [mm] | Total width [mm] | Joint width min. [mm] | Installation depth [mm] | Thickness of alu side plates [mm] | Load bearing capacity lorris (DIN 1072) [kN] |
|---|---|---|---|---|---|---|---|
| FSN 285 E3 ** | 100 (±50) | 397 | 397 | 290 | 28 | 6,6 | 35 |
| FSN 285 E4 ** | 100 (±50) | 397 | 397 | 290 | 28 | 6,6 | 35 |
